|
|
|
|
QG-2 Cleaning Machine |
|
|
Technical data
Tube O.D. 8~14mm
Tube Length 180~1000mm
Cleaning Speed (Adjustable)
80~150
times / min
Tube Section 25×25mm /20×25mm
Compressed Air Pressure 0.7~0.8MPa
 |
l
It
is a good choice to use this machine to
clean the dirty attached on the inner side
of the metal tubes. Cleaned by this machine
the tubes can then be sent into next
processing.
This
machine uses the compres
sed air as its power resource. Its working
procedure is that: the piston pushes the die
cutting out a piece of a cylinder from a
strip of the foamed plastic. The diameter of
the cylinder is bigger than the inner
diameter of the tubes. When the cylinder
piece has been inserted into the tubes, it
produces the pressure onto the wall of the
tubes when passing through the tubes. Pushed
by the compressed air the cylinder piece
passes through the tubes cleaning the inner
wall of the tubes
|
|
|
